Propur® Under Counter Dual Stage Water Filtration System with Pre-Sediment and ProMax™ filter.
An alternative to the The Propur® Dual Countertop Stage system, the Under Counter System provides the same clean, pure drinking water for you and your family. It includes the 5-Micron pleated pre-sediment filter which helps protect your new Propur® filtration system by reducing the damaging effects of sediment such as dirt, sand, debris, rust and other sediments commonly found in aging water supply pipes before your supply water reaches the filtration system. Ideal for use with city or well water.
Routine replacement of the 5-Micron filter element can help increase the effectiveness of your filtration system and can even change the taste of your drinking water.
The Under Counter System is designed to fit under most kitchen counters and installs inline or with separate optional faucet.
Enjoy Propurified™ water by just turning on your faucet. With ProMax™ Filter Technology, reduce/remove a broad range of over 200 contaminants including VOC’s, lead, fluoride, heavy metals, pesticides, SVC’s, disinfectants, inorganic non-metallics, herbicides, pharmaceuticals, PFOA, PFOS and micro-organisms. Tested to NSF-42 and 53 standards. See ProMax™ Lab Report for details.
Features of the Propur® PMC-4002 Under Counter System:
Dual stage housings
Premium quality housings and fittings
Includes 1-piece metal mounting bracket
Includes countertop faucet, hardware kit & 3/8” flex tubing
Available without faucet kit for inline installation
Optional T-Valve adapter available
Includes one ProMax™ and 5-Micron pleated filter elements
ABS plastic housings - BPA & BPS free
No power required
Easy to replace filter elements (includes wrench)
Overall size is 10” x 6” x 14”
Propur® Dual under Counter System Specs:
Type of installation: Under Counter
Maximum Working Pressure: 689.5 Kpa (100 psig)
Minimum Working Pressure: 124 Kpa (20 psig)
Maximum Working Temperature: 38° C (100° F)
Minimum Working Temperature: 5° C (41° F)
Recommended Flow Rate: 0.2 – 1.0 gpm
Contaminant Reduction: Refer to Lab Report ProMax™
Filter Life Expectancy: Up to 1 year
Replacement ProMax™ filter: PMC34RF
Replacement 5-Micron filter: PSD-1005
Introducing new ProMaxTM high efficiency, encapsulated, multi-stage water filter technology from Propur®.
Each stage is comprised of a unique proprietary formula of infused microstructure filtration media designed to target a specific group of contaminants. Contains no resins or beads. Engineered for unsurpassed performance and maximum contaminant reduction.
Independent lab reports show the ProMaxTM reduces/removes a broad range of 200 + contaminants including VOC’s, lead, fluoride, heavy metals, pesticides, SVC’s, disinfectants, inorganic non-metallics, herbicides, pharmaceuticals, PFOA, PFOS and micro-organisms. Helps improve taste and odor. Tested to NSF-42 and 53 standards. See ProMaxTM Lab Reports for details. Unlike carbon block and ceramic composite filters, ProMaxTM filters do not require cleaning to help maintain flow rate and contaminant reduction.
ProMaxTM filter technology is available on select Propur® products including Propur® Shower Filter, Countertop and In-line for the refrigerator.
About TDS (From Wikipedia)
“A TDS Meter indicates the Total Dissolved Solids (TDS) of a solution, i.e. the concentration of dissolved solids in it. Since dissolved ionized solids such as salts and minerals increase the conductivity of a solution, a TDS meter measures the conductivity of the solution and estimates the TDS from that.
A TDS meter typically displays the TDS in parts per million (ppm). For example, a TDS reading of 1 ppm would indicate there is 1 milligram of dissolved solids in each kilogram of water.”
TDS is a measure of total dissolved solids and NOT dissolved contaminants. A higher TDS can simply be high calcium or mineral content. As Propur® filters are made from minerals, TDS may be higher after the water has been treated. This does not mean the filter isn’t working, it means the TDS meter is picking up the minerals that are naturally released by the filter.
A PPM meter is the same as a TDS meter, it is simply measures dissolved solids in water. A TDS meter is not generally recognized in the industry as a proper means of testing water for contaminants. They were created years ago by the manufacturers of reverse osmosis systems as a means of demonstrating the effectiveness of RO which removes most if not all minerals.